Friday, July 27, 2012

DIY Dessert/Appetizer Tier Stand


This is so easy! And you can reuse the candle sticks and plates by using a hair-blow dryer to reheat the welded glue sticks to take the tiers apart!!

You'll Need:
  • 3 plates different sizes; ideally a large, medium and small. (the picture shows 2 medium plates and 1 small-because that's what I had on hand and they worked great).
  • 2 candlestick holders
  • hot glue gun and glue sticks
Directions:
  1. Hot glue the top of the candle stick holder and place it upside down onto the center of your largest plate (gluing the smaller part of the candle holder to the plate-top-surface, gives more room on the plate for goodies!). Hot glue the upside-down bottom of candle stick holder and place the medium plate in the center on top of hot glue.
  2. Follow the same steps as in direction 1 to glue second candle holder and small top plate tier.
If you glue the plates off center, just blow dry on high near glued area with a hair dryer to un-stick and start over.

No comments:

Post a Comment